Items:  0
£0.00 Ex. VAT
Wilo Comfort Pressuritsation Units

Wilo Comfort Pressuritsation Units

From £856.50 Ex. VAT
( £1,027.80 Inc. VAT inc. VAT)
Item out of Stock    |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Pressurisation units for heating and chilled water systems

Wilo pressurisation units are available in four ranges to suit every installation. From open pack base mounted, comfort wall and floor mounted and twin systems able to control both heating and chilled systems. Each range has one and two pump models available with a selection of pumps to suit a range of static requirements. Wilo pressurisation units are designed to keep sealed MTHW*, LTHW and chilled water systems at a predetermined pressure by topping the system up with wholesome water via an AB air gap. 1 or 2 pumps are controlled by the Wilo comfort controller.

Comfort Controller The comfort controller works on closed loop pressure control via an analogue pressure transducer and an electronic micro processor ensuring accurate measurement and feedback of system condition. The control philosophy allows the duty pump to run, ensuring that the cold fill pressure (CF) measured in bar is constantly met. 2 pump models will rotate the duty automatically between both pumps ensuring even wear; if the duty pump fails the standby pump will start automatically. To ensure efficient operation of the sealed system the comfort controller also monitors the number of pump starts and changes in pressure providing excess start or system leak alarms if operating outside of the standard parameters. The controller has a two tier security access with view mode allowing access to the hand / off / auto function and then to view all other parameters only. The user mode requires a password for access to parameters such as cold fill pressure, high pressure, low pressure and excess starts alarms.

System Fill The open pack and comfort range, with exception of wall mount unit, can fill the system without the need for a quick fill loop. The comfort controller has a system fill command that will enable the pump to run for a maximum of 24 hours or until the CF pressure has been met without activating any alarms.

 Selection details Wilo UK can select the correct pressurisation unit and expansion vessels for your system in accordance with BS7074 if you provide the following information:

 1 Static height of the building above the pressurisation unit (metres)

 2 System content (litres) If unknown provide the boiler power (Kw) which can then be used to estimate the system content

 3 Flow and return temperatures

 4 Glycol content (%)

 

 5 Final working pressure

Delivery Policy

We offer a free delivery service on most orders over £50.00 (Monday to Friday)

JTM Plumbing is happy to offer a next working day delivery service for all parcels being sent providing the items are in stock. 95% of our parcels which are ordered by 3pm are dispatched via Courier or Royal mail 1st class for delivery the following day. Certain outlying areas may take longer to arrive due to courier restrictions/timescales. 

Parcels up to .75kg are normally Royal mail unless the value is more than £80.00 when it will go with the Courier.

Further charges may apply for standard parcels being delivered to remote locations and offshore islands, please refer to the checkout page for a list of affected postcodes.

Standard orders under £50 will incur a postage and packaging charge of £5 + VAT for delivery within our UK Mainland delivery areas.

Please call for prices regarding Long length to remote UK and all international orders prior to placing your order so we can advise on excess charges.

 

As we use 3rd party delivery agents JTM Plumbing we cannot guarantee that all deliveries will be the next working day. JTM will not be liable for any loss of income, loss of profits, loss of markets, loss of reputation, loss of customers, loss of use, loss of an opportunity even if we had knowledge that such damages or loss might arise or for any indirect, incidental, special or consequential damages or loss howsoever arising. 

 If you need any more information regarding stock, postal charges, dispatch time or timed delivery options and cost please call us directly on 01325 488588 or email sales@jtmplumbing.co.uk


Returns Policy

Your Right of Cancellation 

You have the right to cancel the contract at any time up to 14 days after you receive the goods under the Distance Selling Regulations (DSR). Please note that this policy has some limitations which are detailed below and does not apply to business customers. 

To exercise your right of cancellation you must give written notice to JTM Plumbing either via hand, post or email. Notification by telephone is not sufficient. 

Except in the case of faulty or misdescribed goods, if you exercise your right of cancellation after the goods have been delivered to you, you will be responsible for returning the goods to JTM Plumbing at your own cost. The goods must be returned to the address as shown on the returns form. You must take reasonable care to ensure the goods are not damaged or the box defaced in any way in the meantime or whilst in transit. In the case of faulty or misdescribed goods JTM Plumbing shall, after receiving notification, either collect the goods from you or ask you to return the goods at an agreed cost which JTM Plumbing will pay for. 

Once you have notified JTM Plumbing that you are cancelling the contract, JTM Plumbing will refund or re-credit you within 30 days for any sum that has been paid by you or debited from your credit card for the goods. If you have paid for excess postage charges for special deliveries these will not be refunded only our standard delivery cost if this was paid as an addition. 

Except in the case of faulty or misdescribed goods, if you do not return the goods as required, JTM Plumbing may charge you a sum not exceeding the direct costs of recovering the goods. 

You do not have the right to cancel the contract if the order is for consumable goods which, by their nature, cannot be returned, save where a fault is discovered which could not have been discovered otherwise than by unsealing the goods. 

 

Returns 

We know that you will be pleased with your purchases from JTM Plumbing. However, there may be occasions when you will need to return items to us. 

In all instances of a return, please contact us first. You must receive a "Return Order Number" 

 

Items Damaged in Transit 

If any standard items were damaged in transit, we ask that you report it to us within 7 working days (please note that this is 48 hours for our business customers). If the items are visibly damaged on receipt, simply refuse the delivery. Items should be returned in their original packaging complete with all accessories and documentation. Once received back into our warehouse, we'll issue a replacement or full refund to you via your original payment method and reimburse your reasonable return carriage costs. 


Items Faulty on Arrival 

If your items are faulty on arrival, you have 28 calendar days in which to inform us of the fault (please note that for our business customers, this is 14 calendar days). Items should be returned in their original packaging complete with all accessories and documentation. Once we have verified the fault, we'll issue a replacement or full refund to you via your original payment method and reimburse your reasonable return carriage costs. We test returned items, and if a returned item is found not to be faulty by our technicians we will return the item to you, in this instance you will be liable for the return carriage. 

 

Items Faulty in Warranty Period 

If any of your purchases develop a fault, and it's more than 28 calendar days since receipt, then provided your item is within its warranty period, you are entitled to a warranty repair. In some cases, manufacturers provide a specialist full on-site service and/or telephone help facilities for your convenience which we recommend you use in order to correct the fault quickly. For business customers all warranty repairs after 28 days of receipt are referred directly to the manufacturer (unless otherwise stated) 

 

If you Change your Mind 

 If you have simply changed your mind about any item ordered and you wish to return it, then in line with the Distance Selling Regulations (DSR) you can do so provided you inform us of your decision within 10 days of receipt. The item must not be used and must be 'as new' when returned to us. Once you've informed us that you wish to return goods under the DSR, you have 28 calendar days to do so, at your own expense. Once the item is received at JTM Plumbing, we'll issue a full refund for the product to your original payment method. Please note this policy has some limitations and does not apply to business customers.


Returns Address

 

JTM Plumbing Ltd

Unit 9, Universal Business Park

Henson Road

Darlington

DL1 4WG

Contact us for our Payment & Security policy

Be the first to review Wilo Comfort Pressuritsation Units. Write a review ›
  1+  
Wilo Comfort P135 Pressurisation Units £856.50 Ex. VAT
Wilo Comfort P160 Pressurisation Units £954.75 Ex. VAT
Wilo Comfort P235 Pressurisation Units £978.75 Ex. VAT
Wilo Comfort P260 Pressurisation Units £1,176.75 Ex. VAT
Wilo Comfort P180 Pressurisation Units £1,145.25 Ex. VAT
Wilo Comfort P280 Pressurisation Units £1,493.25 Ex. VAT